24 hours max. 100% Pro
Prices are tax included
The pack includes everything you need to start 3D printing. All the tools brought together in a 'starter pack' to help with your first prints and look after your 3D printer.
Ideal for post-treatment of 3D printed objects, the XTC 3D kit smooths your 3D prints to give them a smooth appearance. This smoothing kit works on many materials: ABS, PLA, resin. It’s simple to use, transparent, and the effects of the product are fast. Read the instructions before use.
This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.
DimaFix is a spray adhesive to be applied to the plate to avoiding detachment during printing. With improved sticking agents, DimaFix is extremely effective in addressing the problem of warping (corners of the print that detach from the plate). 400ml bottle.
Bi-material cutting pliers for your 3D printing-related work. These pliers let you cut your filaments cleanly to print freely.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
Bi-material pliers for your 3D printing work. These multi-function pliers also cut, so you can cut your filaments cleanly for hassle-free printing.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
The 3M BlueTape 2090 ribbon is put on the printing plate to prevent problems of detachment (or warping/curling) encountered when printing. It sticks perfectly, is easy to position and take off without leaving marks on your printer’s print plate.
Simplify3D is an extremely comprehensive professional software for 3D printing. To date, no other 3D printing software offers as many settings and options as Simplify3D software.
Kapton tape helps your 3D prints stick better to your plate, regulating temperature changes of the print surface to avoid peeling.
This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.
D-Limonene is used for dissolving HIPS-type filaments. HIPS filaments, used mainly as print supports, dissolve in a few hours in D-Limonene. Use with care.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).
Kapton tape helps your 3D prints stick better to your plate, regulating temperature changes of the print surface to avoid peeling. 33m long x 40mm wide.
This 20g glue stick is ideal for complex prints (materials that contract) such as ABS, Nylon, PET.
Adhesive specially designed to glue and assemble objects printed in nylon. The Taulman materials manufacturer offers this special glue to join objects easily with a special adhesive. (Keep out of reach of children).
Buildtak special 3D printing spatula, ergonomic function with non-slip plastic handle to easily remove prints from the 3D printer plate.
Transparent mineral oil-based lubricant for clean, light lubrication. 100ml bottle.
Duster spray designed for dusting, maintenance and cleaning your equipment. High-purity compressed air dry spray in 400ml size.
Heating plate cleaner, designed for 3D printers. This cleaner ensures a smooth surface and removes impurities after printing. 500ml spray.
PLASTIMPERM F10 is an aqueous formulation for thermoplastics and all parts printed using 3D printing technologies. This product is specially formulated to provide impermeability to materials from water, oil and certain solvents and chemicals.