Polycarbonate Filament 

Find all the spools of polycarbonate or PC filament here. Polycarbonate has the special feature of being low-flammability, its main characteristic being to have a very high glass transition temperature (140°C). PC is used in the manufacture of casings, helmets and lenses. It is very important to print Polycarbonate PC filaments for 3D printers with a very hot nozzle.

Polycarbonate PC filaments are available in 1.75mm and 2.85mm depending on the diameter accepted by your 3D printer. It prints at a minimum of 260°C.
 
To make sure you print your polycarbonate filament correctly, check out the advice and guidance on the product sheet before buying. Find the best prices on Makershop3D, as well as all the information you need to help you choose from the various options. To avoid any printing problems, don’t hesitate to tap into our expertise by contacting us before buying.
11 products
Select your filters from the list below
9.5 / 10
Moyenne établie par les clients Makershop sur 535 avis.
Remove all
0 product in your comparator
Hide selection See selection
  • PC ABS 1.75mm is a Polycarbonate and ABS alloy designed to create strong, resilient parts. It requires a nozzle capable of heating to 260°C and a heating plate of at least 100°C. Sold in a 125g roll.

    0 review
    19,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • PC ABS 1.75mm is a Polycarbonate and ABS alloy designed to create strong, resilient parts. It requires a nozzle capable of heating to 260°C and a heating plate of at least 100°C. Sold in a 125g roll.

    0 review
    19,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Polycarbonate is a polymer with high transparency. This filament is very rigid and has excellent mechanical properties that are characterised by low expansion and low heat distortion. Polycarbonate is very resistant to impact. Comes in a 500g spool.

    0 review
    46,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • PC-Plus transparent polycarbonate from Polymaker offers excellent print quality thanks to its heat resistance. Parts don’t become detached during printing (no warping) and are very durable and robust. Comes in a 750g spool with sachet of desiccant and instructions for use. We recommend you use Buildtak film when printing.

    0 review
    44,95 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • PC-Plus white polycarbonate from Polymaker offers excellent print quality thanks to its heat resistance. Parts don’t become detached during printing (no warping) and are very durable and robust. Comes in a 750g spool with sachet of desiccant and instructions for use. We recommend you use Buildtak film when printing.

    0 review
    44,95 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • PC-Plus black polycarbonate from Polymaker offers excellent print quality thanks to its heat resistance. Parts don’t become detached during printing (no warping) and are very durable and robust. Comes in a 750g spool with sachet of desiccant and instructions for use. We recommend you use Buildtak film when printing.

    0 review
    44,95 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • White PC-ABS from Neofil3D is a filament that combines Polycarbonate and ABS which makes it very resistant to impacts while retaining good dimensional precision. Comes in a 750g spool.  

    0 review
    34,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Black PC-ABS from Neofil3D is a filament that combines Polycarbonate and ABS which makes it very resistant to impacts while retaining good dimensional presicion. Comes in a 750g spool.  

    0 review
    34,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • With Ultimaker PC (polycarbonate) filament, you can print heavy and difficult parts that retain dimensional stability even when the material is exposed to temperatures as high as 110°C. PC is the perfect filament for printing moulds, tools and functional prototypes.

    0 review
    65,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • With Ultimaker PC (polycarbonate) filament, you can print heavy and difficult parts that retain dimensional stability even when the material is exposed to temperatures as high as 110°C. PC is the perfect filament for printing moulds, tools and functional prototypes.

    0 review
    65,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • With Ultimaker PC (polycarbonate) filament, you can print heavy and difficult parts that retain dimensional stability even when the material is exposed to temperatures as high as 110°C. PC is the perfect filament for printing moulds, tools and functional prototypes.

    0 review
    65,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
Newsletter subscription
Let's keep in touch !