Polycarbonate natural 1.75mm

Ref. POL-NAT-769

Polycarbonate is a polymer with high transparency. This filament is very rigid and has excellent mechanical properties that are characterised by low expansion and low heat distortion. Polycarbonate is very resistant to impact. Comes in a 500g spool.

39,08 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
offerts dès 200€
Expert support
Buy at Makershop
Description

Polycarbonate natural 1.75mm
 

Filament produced in France by the Nanovia company, based in Brittany.

This filament, for industrial use, combines rigidity and impact resistance. Printed parts are very tough.

Nanovia natural polycarbonate has excellent mechanical properties that result in low expansion and low distortion to heat.

This material is good for cutting or drilling and is suitable for food contact uses.

Features:

- Impact resistance
- Heat resistance
- Possible food contact
- Insulating
 


Filament for experts only due to its numerous print constraints.


 

Printing tips
 

  • Extrusion temperature 280 to 290°C
  • Plate temperature 120 to 150°C
  • Print speed 60 to 70mm/s
  • Material PC
Data sheet
Brand Nanovia
Technology Fused Deposition Modeling (FDM)
Type Consumable
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material Polycarbonate
Net weight 500g
Color Natural
Extrusion temperature 280 to 290°C
Build plate temperature 120 to 150°C (heated build plate required)
Printing speed 60 to 70mm/s
Tensile strength 2340 MPa
Elongation at break 150%
Density 1.20 g/cm³
Type de matériaux Filament
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    12,42 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,25 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    3,50 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.

    9,33 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    14,08 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !