24 hours max. 100% Pro
Prices are tax excluded
ColorFabb XT Black 1.75mmXT Black from ColorFabb, 1.75mm in diameter, is an absolutely neutral and translucent PET which lets the light pass through. If your 3D printing project requires a degree of transparency, then XT filament is the one to go for. ColorFabb produces high-quality filament. This XT (PET) filament is approved by the FDA (USA), which means it is allowed to come into contact with food. XT is also durable and very hard to break.
Comes in a 750g spool.
|Technology||Fused Deposition Modeling (FDM)|
|Filament diameter||2.85mm, 1.75mm|
|Extrusion temperature||240 to 260°C|
|Build plate temperature||60 to 70°C (heated build plate required)|
|Type de matériaux||Filament|
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).