WoodFill ColorFabb Wood 1.75mm

Ref. WOO-COL-WOO-336
If you’re looking for something special in your 'filament library', then have a look at this Woodfill from ColorFabb. About 70% Colorfabb PLA and 30% recycled wood fibres. This spool of WoodFill contains 600g of 1.75mm filament.

39,90 € Tax incl. 33,25 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop
Description

WoodFill 1.75mm Wood filament

WoodFill 1.75mm Wood filament is extruded in the Netherlands. It is made up of 30% wood fibres and 70% ColorFabb PLA.

The smell and touch perfectly reflect the feel of wood.

Colorfabb measures the diameter of its filaments 1,000 times per second to guarantee they’re flawless. The spool is hot-sealed just minutes after production.

Printing tips:

It may be necessary to increase the flow rate on the 3D printer to increase the fluidity of the WoodFill material through the printing nozzle.

Printing tips

  • Extrusion temperature 195 to 220°C
  • Plate temperature 0 to 60°C
  • Printing speed 30 to 60mm/s
  • Material Wood



Related documents
Download (36.55k) TDS - Wood ColorFabb

Download (31.91k) MSDS - Wood ColorFabb

Data sheet
Brand ColorFabb
Technology Fused Deposition Modeling (FDM)
Type Consumable
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material Wood
Net weight 600g
Color Brown
Extrusion temperature 195 to 220°C
Build plate temperature 0 to 60°C (heated build plate not needed)
Printing speed 30 to 60 mm/s
You may also like
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • Bi-material pliers for your 3D printing work. These multi-function pliers also cut, so you can cut your filaments cleanly for hassle-free printing.

    7,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    4,20 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.

    5,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !