ABS Kevlar Aramid Fibre

Ref. ABS-KEV-ARA-FIB-756

ABS aramid fibre (Kevlar) provides excellent features for printed parts without nozzle clogging while significantly reducing the phenomenon of serious abrasion to your printing equipment. The optimised formula produces a less fragile filament compared to a lot of the carbon-reinforced thermoplastics normally available on the market. Comes in a 500g spool.

48,15 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
offerts dès 200€
Expert support
Buy at Makershop
Description

ABS Kevlar Aramid Fibre 1.75mm

Filament produced in France by the Nanovia company, based in Brittany.

This filament, for industrial and consumer use, combines ease of printing and the quality of a mechanically resistant material.

Kevlar aramid fibre ABS is a formulation specifically designed for 3D printers. The aramid fibre size distribution has been specifically selected to adapt to standard print nozzles. The combination of a precise fibre content and size selection means you can obtain excellent characteristics for your printed parts.

This Kevlar filament prevents nozzle blocking and reduces the phenomenon of serious abrasion to your printing equipment. The optimised formula produces a less fragile filament compared to many thermoplastics commonly available on the market.

Print settings are compatible with most 3D printers with a heating plate.

These Kevlar aramid fibres are calibrated from pure recycled aramid fibres to adapt to 3D printing extrusion nozzles of 0.4 mm or more, and thus prevent clogging of the nozzle, which often occurs with standard carbon fibre (standard deviation: 155.3)



Features:

- Lighter parts
- Increased resistance to friction
- Shock absorption
- Less brittle


Precautions:

If grinding or milling printed parts, users must wear personal protective equipment (mask, gloves etc).



Printing tips

  • Extrusion temperature 250 to 270°C
  • Plate temperature 90 to 110°C
  • Print speed 50 to 70mm/s
  • Material ABS
Data sheet
Brand Nanovia
Technology Fused Deposition Modeling (FDM)
Type Consumable
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material ABS
Net weight 500g
Color Black
Extrusion temperature 250 to 270°C
Build plate temperature 90 to 110°C (heated build plate required)
Printing speed 60 to 70mm/s
Tensile strength 2.4 GPa
Elongation at break 7.5%
Density 1.08 g/cm³
Type de matériaux Filament
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    12,42 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,25 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    3,50 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.

    9,33 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    14,08 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !