24 hours max. 100% Pro
Prices are tax included
Using Esun 3D ABS 3mm filamentConductive 3D ABS 3mm diameter filament requires a printing plate heated to between 70 and 100°C as well as an extrusion temperature between 220 and 260°C.
Conductive ABS can be used in several ways:
3D ABS 3mm filament qualityThis 3D ABS filament was chosen for its high quality and impressive results observed on parts printed in 3D. It has very good adhesion to the 3D printing plate, a regular diameter and gives off only a very slight odour during extrusion.
When to use 3D ABS filamentItems for outdoor use: More resistant to harsh conditions and with a high melting temperature, it’s the ideal plastic for outdoors
Professional applications: ABS is perfect in the business context for its strength and durability
Mechanical parts: Commonly used in industry, ABS tends to bend rather than break while maintaining excellent shock-resistance
|Technology||Fused Deposition Modeling (FDM)|
|Type of consumables||Filament (non proprietary)|
|Filament diameter||3mm (compatible 2.85mm)|
|Extrusion temperature||220 to 260°C|
|Build plate temperature||70 to 100°C (heated build plate required)|
This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).