ABS Natural SPE 1.75mm

Ref. ABS-NAT-SPE-751
Spool of natural ABS, certified endocrine disruptor-free (SPE). This filament is characterised by its good impact resistance and its lightness. Like all thermoplastics, ABS contracts in contact with the air, so use of a heating plate when 3D printing is recommended. Comes in a 500g spool.

37,75 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
offerts dès 200€
Expert support
Buy at Makershop

ABS Natural SPE 1.75mm

Filament produced in France by the Nanovia company, based in Brittany.

ABS is a thermoplastic polymer widely used in the automotive industry (bodywork), toys (building bricks etc) and Hi-Tech (casings, computers, phones, remote controls...).

ABS Natural SPE combines ease of printing and quality of a mechanically resistant material. Indeed, printed parts absorb impacts well and are lighter.

This filament can be welded and smoothed using a smoothing solution.

ROHS: the raw material used to manufacture ABS Natural complies with the requirements of Article 4.1 of European Directive EC/65/20011.


- Excellent impact resistance
- Mechanically resistant
- Lightweight

Printing tips

  • Extrusion temperature 250 to 270°C
  • Plate temperature 90 to 110°C
  • Print speed 60 to 70mm/s
  • Material ABS
Data sheet
Brand Nanovia
Technology Fused Deposition Modeling (FDM)
Type Consumable
Feature Endocrine disruptors free
Type of consumables Filament (non proprietary)
Filament diameter 2.85mm, 1.75mm
Material ABS
Net weight 500g
Color Natural
Extrusion temperature 250 to 270°C
Build plate temperature 90 to 110°C (heated build plate required)
Printing speed 60 to 70mm/s
Tensile strength 42 MPa
Density 1.05 g/cm³
Type de matériaux Filament
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    12,42 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,25 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    3,50 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.

    9,33 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    14,08 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !