24 hours max. 100% Pro
Prices are tax included
Neofil3D Dark Wood filament is a modified PLA-based filament you can use to bring the feel and smell of wood to your prints. Very easy to print even at low temperatures. Comes in a 500g spool.
Neofil3D Dark Wood 1.75mm
Dark Wood filament from Neofil3D is a modified PLA-based filament, very easy to print even at low temperatures. It gives printed objects the feel and smell of wood.
Light wood filament from Neofil3D is fully biodegradable and suffers very little from warping (peeling) during printing. Printing is fluid, easy and pleasant thanks to its wood smell.
|Type of consumables||Filament (non proprietary)|
|Filament diameter||1.75mm, 2.85mm|
|Extrusion temperature||180 à 230°C|
|Build plate temperature||0 to 60°C (heated build plate not needed)|
|Printing speed||30 to 50mm/s|
|Tensile strength||70 MPa|
|Elongation at break||170%|