XT White 1.75mm

Ref. WHI-157
XT White from ColorFabb is an absolutely neutral and translucent PET which lets the light pass through. If your 3D printing project requires a degree of durability, then XT filament is the one to go for. ColorFabb produces high-quality filament. This XT (PET) filament is approved by the FDA (USA), which means it is allowed to come into contact with food. XT White filament comes in a 750g spool.

38,95 € Tax incl. 32,46 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop
Description

ColorFabb XT White 1.75mm

XT White from ColorFabb, 1.75mm in diameter, is an absolutely neutral, translucent PET which lets the light pass through. If your 3D printing project requires a degree of transparency, then XT filament is the one to go for. ColorFabb produces high-quality filament. This XT (PET) filament is approved by the FDA (USA), which means it is allowed to come into contact with food. XT is also durable and very hard to break.

Features:

  • Great strength
  • Odourless
  • High glass transition temperature
  • No styrene, no bisphenol
  • Safe for use with food

Comes in a 750g spool.

Printing tips

  • Extrusion temperature 240 to 260°C
  • Plate temperature 60 to 70°C
  • Material XT (PET)
Data sheet
Brand ColorFabb
Technology Fused Deposition Modeling (FDM)
Type Consumable
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material XT
Net weight 750g
Color White
Extrusion temperature 240 to 260°C
Build plate temperature 60 to 70°C (heated build plate required)
Density 1.21 g/cm³
You may also like
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    4,20 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.

    5,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
Products in the same category
  • XT Black from ColorFabb is an absolutely neutral and translucent PET which lets the light pass through. If your 3D printing project requires a degree of durability, then XT filament is the one to go for. ColorFabb produces high-quality filament. This XT (PET) filament is approved by the FDA (USA), which means it is allowed to come into contact with food....

    38,95 € Tax incl.
    | Product available with different options
    Product available with different options
    Add to cart More
  • XT Red from ColorFabb is an absolutely neutral and translucent PET which lets the light pass through. If your 3D printing project requires a degree of durability, then XT filament is the one to go for. ColorFabb produces high-quality filament. This XT (PET) filament is approved by the FDA (USA), which means it is allowed to come into contact with food. XT...

    38,95 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !