24 hours max. 100% Pro
Prices are tax included
Coconut filament 1.75mmThis 1.75mm filament is made up of 40% coconut wood powder. It smells of wood and gives an authentic look to your 3D prints.
This Coconut filament, extruded in the Netherlands, should be printed very slowly to be properly extruded through the nozzle of your 3D printer.
It is not necessary to use glue or spray adhesive on the printing plate, as this may damage the piece when detaching it.
|Technology||Fused Deposition Modeling (FDM)|
|Type of consumables||Filament (non proprietary)|
|Filament diameter||1.75mm, 2.85mm|
|Extrusion temperature||210 to 230°C|
|Build plate temperature||0 to 60°C (heated build plate not needed)|
|Printing speed||20 to 40mm/s|
|Type de matériaux||Filament|
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
Bi-material pliers for your 3D printing work. These multi-function pliers also cut, so you can cut your filaments cleanly for hassle-free printing.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.