24 hours max. 100% Pro
Prices are tax included
Light Brown 1.75mm PLA from ColorFabb
ColorFabb Light Brown 1.75mm PLA is a shade that tends between beige and brown. The properties of this filament promise you some great quality prints. This filament will definitely have a part to play in the creation of your prints.
ColorFabb – a premium-quality PLA
A controlled diameter: The filament diameter is measured over 1000 times per second and ensures that each spool can be extruded properly on every 3D printer to deliver excellent results.
Optimal packaging: A few minutes after producing a ColorFabb spool, the filament is hermetically sealed like the cardboard box used for packaging. This ensures your PLA remains fresh and perfectly preserved.
|Technology||Fused Deposition Modeling (FDM)|
|Type of consumables||Filament (non proprietary)|
|Filament diameter||1.75mm, 2.85mm|
|Extrusion temperature||195 to 220°C|
|Build plate temperature||0 to 60°C (heated build plate not needed)|
|Elongation at break||10.5%|
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.
This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).
Butter, cream and super-smooth. It’s the base material for all PLA/PHA filaments. It's a nice neutral colour that’s just a little translucent. ColorFabb PLA is a premium PLA manufactured in the Netherlands. It is 100% biodegradable and developed for excellent quality 3D printing. ColorFabb PLA comes in a 750g spool.
Half-way between red and blue, this really is a vibrant colour. Originally, this colour was used in dyes and was named fuchsia. The colour was later renamed magenta in honour of the war between the French and the Austrians in the town of Magenta in Italy. ColorFabb PLA is a premium PLA manufactured in the Netherlands. It is 100% biodegradable and...
This delicious shade of yellow is very intense to ensure your models are truly staggering. ColorFabb PLA is a premium PLA manufactured in the Netherlands. It is 100% biodegradable and developed for excellent quality 3D printing. ColorFabb PLA comes in a 750g spool.
A neutral colour between black and white. With just a hint of blue-grey, this PLA is one of the classic colours. ColorFabb PLA is a premium PLA manufactured in the Netherlands. It is 100% biodegradable and developed for excellent quality 3D printing. ColorFabb PLA comes in a 750g spool.