24 hours max. 100% Pro
Service Secured
payment
No products
Prices are tax excluded
No products
Prices are tax excluded
Traffic Red 1.75mm PLA from ColorFabbColorFabb Traffic Red 1.75mm PLA offers a shade of red comparable to traffic lights, ideal for printing vivid pieces. The properties of this filament promise you some great quality prints. This filament will definitely have a part to play in the creation of your prints. ColorFabb – a premium-quality PLAA controlled diameter: The filament diameter is measured over 1000 times per second and ensures that each spool can be extruded properly on every 3D printer to deliver excellent results. Optimal packaging: A few minutes after producing a ColorFabb spool, the filament is hermetically sealed like the cardboard box used for packaging. This ensures your PLA remains fresh and perfectly preserved. | Printing tips
|
Brand | ColorFabb |
Technology | Fused Deposition Modeling (FDM) |
Type | Consumable |
Type of consumables | Filament (non proprietary) |
Filament diameter | 1.75mm, 2.85mm |
Material | PLA |
Net weight | 750g |
Color | Red |
Extrusion temperature | 195 to 220°C |
Build plate temperature | 0 to 60°C (heated build plate not needed) |
Tensile strength | 61.5 |
Elongation at break | 10.5% |
Density | 1.21 g/cm³ |
Type de matériaux | Filament |
This 21g glue stick improves adhesion of print items to the plate and thus avoids warping during printing.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.
This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.
This delicious shade of yellow is very intense to ensure your models are truly staggering. ColorFabb PLA is a premium PLA manufactured in the Netherlands. It is 100% biodegradable and developed for excellent quality 3D printing. ColorFabb PLA comes in a 750g spool.
Neutral but definitely not boring, this standard white filament has a creamy look. ColorFabb PLA is a premium PLA manufactured in the Netherlands. It is 100% biodegradable and developed for excellent quality 3D printing. ColorFabb PLA comes in a 750g spool.