ColorFabb GlowFill 1.75mm

Ref. COL-GLO-664
This is GlowFill: green PLA Phosphorescent filament from ColorFabb. PLA ColorFabb comes in a 750g spool.

39,95 € Tax incl. 33,29 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop
Description

GlowFill 1.75mm from ColorFabb
 

PLA GlowFill is phosphorescent in the dark (it turns green). Perfect for some really practical applications.

ColorFabb filament is a high-quality filament.


 

ColorFabb is a premium-quality PLA


A controlled diameter: The filament diameter is measured over 1000 times per second, ensuring that each spool can be extruded correctly on every 3D printer to deliver excellent results.

Optimal packaging: Just a few minutes after a ColorFabb spool is produced, the filament is hermetically sealed as is the cardboard box used for packaging. This ensures your PLA stays fresh and in perfect condition.

Printing tips
 

  • Extrusion temperature 195 to 220°C
  • Plate temperature 0 to 60°C
  • Material PLA
Related documents
Download (97.09k) TDS - GlowFill

Download (32.26k) MSDS - GlowFill

Data sheet
Brand ColorFabb
Technology Fused Deposition Modeling (FDM)
Type Consumable
Feature Phosphorescent
Type of consumables Filament (non proprietary)
Filament diameter 2.85mm, 1.75mm
Material PLA
Net weight 750g
Color Natural
Extrusion temperature 195 to 220°C
Build plate temperature 0 to 60°C (heated build plate not needed)
Density 1.21 g/cm³
You may also like
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,90 € Tax incl.
    Out of stock | Not available
    Out of stock
    Add to cart More
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    4,20 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.

    11,20 € Tax incl.
    Out of stock | Not available
    Out of stock
    Add to cart More
  • This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.

    5,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !