24 hours max. 100% Pro
Prices are tax included
Bridge Taulman 1.75mm
Bridge filament from Taulman 3D is a good compromise between nylon and ABS. With an affordable price, it is much easier to print than nylon while retaining the same properties.
Examples of creations:
|Technology||Fused Deposition Modeling (FDM)|
|Filament diameter||1.75mm, 3mm (compatible 2.85mm)|
|Extrusion temperature||240 to 250°C|
|Build plate temperature||30 to 60°C (heated build plate required)|
|Printing speed||30 to 60 mm/s|
|Elongation at break||248%|
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
Kapton tape helps your 3D prints stick better to your plate, regulating temperature changes of the print surface to avoid peeling.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).