ColorFabb Bronze filament 1.75mm

Ref. COL-BRO-337
This BronzeFill 1.75mm filament from ColorFabb is actually made of bronze. Print metal on your desktop 3D printer! Ideal for jewellery, statues or any other artistic project, this bronze is reserved for experts in 3D printing. ColorFabb Bronze 1.75mm filament comes in a 750g or 1.5 kg spool.

49,95 € Tax incl. 41,63 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop
Description

ColorFabb Bronze 1.75mm filament

3D printing in metal is now possible! This amazing, unique filament lets you print real bronze in 3D! With a little sanding and polishing, the bronze particles will start to glitter and shine.

The weight of the material is considerable, about 3 times heavier than conventional PLA (3.9g/cm3) This ColorFabb Bronze filament has a diameter of 1.75mm, is suitable for all 3D printers that take 1.75mm and ensures an even flow during filament extrusion.

Printing tip:

Depending on your settings, adjusting your 3D printer may require a higher flow rate (4-8% extra) than with a conventional filament. A few tests are obviously required before printing this unique filament.

Finishing and post-treatment:

Sanding and polishing your items will make them shine. Start sanding with a 120-180 grain and make sure all the printed layers disappear. Then increase the grain to 240/300 or 600.

Finally, you can use a soft cloth and some copper polish to obtain the true brilliance of bronze.

Example creations (copper on the left/bronze on the right):

Printing tips

  • Extrusion temperature 195 to 220°C
  • Plate temperature 0 to 60°C
  • Material Bronze
Related documents
Download (94.69k) TDS - Bronzefill

Download (169.24k) MSDS - Bronzefill

Data sheet
Brand ColorFabb
Technology Fused Deposition Modeling (FDM)
Type Consumable
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material Bronze
Net weight 750g
Color Brown
Extrusion temperature 195 to 220°C
Build plate temperature 0 to 60°C (heated build plate not needed)
Printing speed 30 to 60 mm/s
Density 3.9 g/cm³
Sales Item on sale
You may also like
  • Bi-material pliers for your 3D printing work. These multi-function pliers also cut, so you can cut your filaments cleanly for hassle-free printing.

    7,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    4,20 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • The 3M BlueTape 2090 ribbon is put on the printing plate to prevent problems of detachment (or warping/curling) encountered when printing. It sticks perfectly, is easy to position and take off without leaving marks on your printer’s print plate.

    15,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
  • This set of needle files is an essential tool for removing the supports and rafts of your 3D printed models. The kit consists of 6 needle files of various shapes to fit any 3D prints.

    5,90 € Tax incl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !