24 hours max. 100% Pro
Prices are tax included
FlexiFil Black 1.75mm
FormFutura filaments are opaque and have a regular diameter. This flexible filament (Shore Hardness: 45D) is designed for minimum peeling (warping) and virtually no deformation during cooling. This FlexiFil flexible filament is extruded in the Netherlands
How to print FlexiFil Black 1.75mm
Make sure you take into consideration the recommendations in this sheet to print FlexiFil properly. A heating plate is required to prevent warping while a reduced speed will ensure trouble-free printing.
Features of FlexiFil FormFutura filament:
|Technology||Fused Deposition Modeling (FDM)|
|Type of consumables||Filament (non proprietary)|
|Filament diameter||1.75mm, 2.85mm|
|Build plate temperature||60 to 100°C (heated build plate required)|
|Printing speed||10 to 30mm/s|
|Tensile strength||95 MPa|
This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).