FilaFlex Beige 1.75mm 250g

Ref. FF1SKIN175250
FilaFlex filament is an elastic, flexible plastic that’s suitable for a range of uses. FilaFlex returns to its original shape after being stretched or pulled. Fully expandable, it can stretch up to 700%. The spool contains 250g of FilaFlex Beige.

16,58 € Tax excl.

Not available Not available

  • 1.75mm
  • 2.85mm
Companies inside EU
No taxes to pay
Free shipping for
offerts dès 200€
Expert support
Buy at Makershop

Spool of FilaFlex Beige 1.75mm flexible filament

Filaflex is an elastic filament for 3D printing. This revolutionary new material is a TPE (thermoplastic elastomer) with a polyurethane base and certain additives to make it printable on a 3D printer.

A flexible filament, elastic and soft

Filaflex has incredible elasticity that allows you to create flexible printed pieces for your projects. You can now create soles, grips, handles, belts and any other type of object that requires a degree of elasticity up to 700% with SHORE A 82 hardness.

This Filaflex spool is Beige in colour.

How to print FilaFlex Beige

Flexible filament prints differently from more rigid filaments. Its elasticity requires a slower speed than normal to avoid under-extrusion.

  • No need for adhesive materials on the plate, as FilaFlex is not prone to peeling
  • Use a low speed of 20mm/s initially before increasing if the results are satisfactory

To prevent the nozzle from clogging, it is sometimes advisable to reduce the filament drive system pressure (depending on your 3D printer).

For improved extrusion, it may be useful to increase the flow directly on the printer or in the Gcode setting.

Examples of creations:

flexible filaflex

Printing tips

  • Extrusion temperature 230 to 250°C
  • Plate temperature 0 to 40°C
  • Recommended speed 20 to 60mm/s
  • Material Flexible (TPE)

Related documents
Download (61.63k) TDS - FilaFlex

Download (134.26k) MSDS - FilaFlex

Data sheet
Brand FilaFlex
Technology Fused Deposition Modeling (FDM)
Type Consumable
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material Flexible (TPE)
Net weight 250g
Color Natural
Extrusion temperature 230 to 250°C
Build plate temperature 0 to 40°C (heated build plate not needed)
Printing speed 20 to 60mm/s
Shore hardness 82A
Tensile strength 39 MPA
Elongation at break 700%
Density 1.21 g/cm³
Type de matériaux Filament
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    12,42 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,25 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    3,50 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.

    9,33 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    14,08 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !