Polyamide 6 natural 1.75mm

0 review
Ref. POL-NAT-771
Spool of PA-6 filament. This plastic (or nylon) filament is rigid and has excellent mechanical properties. It is especially popular in the automotive industry. Comes in a 500g spool.

61,90 € Tax incl. 51,58 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop

Polyamide 6 natural 1.75mm

Filament produced in France by the Nanovia company, based in Brittany.

This filament, for industrial use, combines the rigidity and quality of a mechanically resistant material.

Its mechanical and dimensional properties may be affected by storage and use conditions. Polyamides are susceptible to oxidation at high temperature. It is therefore advisable to steam polyamides before printing.


- Heat resistant
- Rigid
- Mechanically resistant


PA-6 NANOVIA material should not be used for medical or food applications, or be placed in direct contact with the body and/or food.

Printing tips

  • Extrusion temperature 240 to 260°C
  • Plate temperature 80°C
  • Print speed 60 to 70mm/s
  • Material Nylon
Data sheet
Brand Nanovia
Technology Fused Deposition Modeling (FDM)
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material Nylon
Net weight 500g
Color Natural
Extrusion temperature 240 to 260°C
Build plate temperature 80°C (heated build plate required)
Printing speed 60 to 70mm/s
Tensile strength 2100 MPa
Elongation at break 50%
Density 1.14 g/cm³
No review submitted for the moment
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    0 review
    14,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    0 review
    3,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    0 review
    4,20 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    0 review
    16,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
Newsletter subscription
Let's keep in touch !