24 hours max. 100% Pro
Service Secured
payment
No products
Prices are tax excluded
No products
Prices are tax excluded
PETG Carbon Fibre 1.75mmFilament produced in France by the Nanovia company, based in Brittany.This filament, for industrial and consumer use, is characterised by its low stiffness and high carbon content which makes it less brittle. It is particularly used in the paramedical field for making leg prostheses or connecting parts for wheelchairs. Printed parts are extremely durable and can be sanded and worked using standard post-printing processes. The carbon fibre size distribution has been specifically selected to suit standard print nozzles. The combination of a precise mix of carbon fibre and size selection provides excellent features for parts in PETG / Carbon without clogging the nozzle while avoiding serious abrasion problems to printing equipment. These carbon fibres are calibrated from pure recycled carbon fibres to suit 3D printing extrusion nozzles of 0.4 mm or more, and so prevent clogging of the nozzle, which often occurs with standard carbon fibre (standard deviation: 155.3) Features: - Less brittle - Mechanically resistant - Recycled carbon fibres
The carbon fibres are not dangerous in health terms. However, if sanding or machining, short fibres and carbon dust can cause irritation to the skin, eyes and respiratory tract. | Printing tips
|
Brand | Nanovia |
Technology | Fused Deposition Modeling (FDM) |
Type | Consumable |
Type of consumables | Filament (non proprietary) |
Filament diameter | 1.75mm, 2.85mm |
Material | PETG |
Net weight | 500g |
Color | Black |
Extrusion temperature | 250 to 260°C |
Build plate temperature | 90 to 100°C (heated build plate required) |
Printing speed | 30 to 60 mm/s |
Tensile strength | 42 MPa |
Elongation at break | 2% |
Density | 1.05 g/cm³ |
Type de matériaux | Filament |
This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.