24 hours max. 100% Pro
Prices are tax included
Flexible Istroflex Black 1.75mmFilament produced in France by the Nanovia company, based in Brittany.
ISTROFLEX flexible filament is particularly suitable for the production of technical parts requiring little elasticity while retaining their flexible properties, such as vibration and shock absorption pads, joints, interstitial and pressure materials.
- Low elasticity
- Technical application
The raw material used to manufacture ISTROFLEX filament complies with the specific restrictions mentioned in Regulation (EU) No 10/2011 of the Commission on plastic materials and articles intended to come into contact with foods, most recently modified by Regulation (EU) No 2015/174 of the Commission of 5 February 2015.
|Technology||Fused Deposition Modeling (FDM)|
|Type of consumables||Filament (non proprietary)|
|Filament diameter||2.85mm, 1.75mm|
|Extrusion temperature||240 to 260°C|
|Build plate temperature||0 to 60°C (heated build plate not needed)|
|Printing speed||30 to 60 mm/s|
|Tensile strength||13.6 MPa|
|Elongation at break||371%|
|Sales||Item on sale|
This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).