24 hours max. 100% Pro
Service Secured
payment
No products
Prices are tax included
No products
Prices are tax included
ABS Carbon Fibre and Kevlar aramid 1.75mm
Filament produced in France by the Nanovia company, based in Brittany.This filament, for industrial and general consumer use, combines mechanical strength and reduced clogging and abrasion to the nozzle. The combination of a precise mix of carbon fibre and Kevlar aramid and selection of their size provides excellent features for ABS parts printed without nozzle clogging while avoiding the serious problem of abrasion to printing equipment, as is often the case with 100% carbon composites. These aramid fibres are calibrated from pure recycled aramid fibres to adapt to 3D printing extrusion nozzles of 0.4 mm or more, and so prevent clogging of the nozzle, which often occurs with standard carbon fibre (standard deviation: 155.3) Features: - Lightweight - Friction-resistant - Less brittle - Mechanically resistant
If grinding or milling printed parts, users must wear personal protective equipment (mask, gloves etc). |
Printing tips
|
Brand | Nanovia |
Technology | Fused Deposition Modeling (FDM) |
Type | Consumable |
Type of consumables | Filament (non proprietary) |
Filament diameter | 1.75mm, 2.85mm |
Material | ABS |
Net weight | 500g |
Color | Natural |
Extrusion temperature | 250 to 270°C |
Build plate temperature | 90 to 110°C (heated build plate required) |
Printing speed | 60 to 70mm/s |
Shore hardness | 77D |
Tensile strength | 2.4 GPa |
Elongation at break | 7.5% |
Density | 1.08 g/cm³ |
Type de matériaux | Filament |
This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.
A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.
These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.
This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.