PLA Fibre de lin

Ref. PLA-FLA-FIB-743
Flax fibre-based PLA spool. This alloy combines the ease of printing of PLA with improved mechanical features while allowing significant weight saving of printed parts. Comes in a 500g spool.

23,90 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
offerts dès 200€
Expert support
Buy at Makershop
Description

PLA 1.75mm flax fibre

Filament produced in France by the Nanovia company, based in Brittany.

This filament, for industrial and consumer use, combines ease of printing and the quality of a mechanically resistant material.

Lighter than ABS, it lets you print less dense, lighter parts. It is compatible with most FDM printers. (Nozzles of Ø0.4 mm minimum and Ø0.5 mm recommended).

This PLA and Flax Fibre-based alloy is certified by an independent laboratory "Free of endocrine disruptors".

Flax fibres are harvested, produced and supplied by TEXILIS, a French processor.

Features:

- Lighter than ABS
- No endocrine disruptors
- Mechanically resistant


Printing tip:

The colour of the printed material will vary depending on the printing temperature. It will be lighter at 230°C and darker at 260°C.

It is advisable not to extrude the material above 260°C in order to preserve its quality and prevent degradation of the matrix.

Printing tips

  • Extrusion temperature 210 to 260°C
  • Plate temperature 0 to 70°C
  • Print speed 60 to 70mm/s
  • Material Flax
Data sheet
Brand Nanovia
Technology Fused Deposition Modeling (FDM)
Type Consumable
Feature Wood texture
Type of consumables Filament (non proprietary)
Filament diameter 2.85mm, 1.75mm
Material PLA
Net weight 500g
Color Natural
Extrusion temperature 210 to 260°C
Build plate temperature 0 to 70°C
Printing speed 30 to 60 mm/s
Shore hardness 77D
Tensile strength 39 MPA
Elongation at break 2%
Density 1.00 g/cm³
Glass transition temperature 54°C
Type de matériaux Filament
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    12,42 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    3,25 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    3,50 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • This odourless spray adhesive allows your 3D prints to stick firmly to the print plate of your 3D printer. A few sprays are sufficient to make the first layers stick. 3DLAC spray comes in 400ml size.

    9,33 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    14,08 € Tax excl.
    In Stock | Shipped within 24 hours
    In Stock
Newsletter subscription
Let's keep in touch !