ABS Carbon Fibre 1.75mm

0 review
Ref. ABS-CAR-FIB-753
Spool of ABS filament made of carbon fibre. Its optimised formula produces printed pieces which are lighter and mechanically stronger. Comes in a 500g spool.

58,00 € Tax incl. 48,33 € Tax excl.

In stock Shipped within 24 hours

  • 1.75mm
  • 2.85mm

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop
Description

ABS Carbon Fibre 1.75mm
 

Filament produced in France by the Nanovia company, based in Brittany.

This filament is intended for industrial and general consumer use.
 

Carbon fibre ABS filament is calibrated from recycled pure carbon fibres to adapt to extrusion nozzles of 0.4 mm or bigger, and thus prevent clogging of the nozzle, which often occurs with standard carbon fibres (standard deviation: 155.3).
 

The combination of a precise carbon fibre content and size selection provides excellent features of ABS parts without nozzle blocking while avoiding any major abrasive effect to the printing equipment.

Print settings are compatible with most 3D printers with a heating plate.



Features:

- More durable than standard ABS
- Mechanical reinforcement
- Lighter prints

Printing tips
 

  • Extrusion temperature 250 to 270°C
  • Plate temperature 90 to 110°C
  • Print speed 30 to 60mm/s
  • Material Carbon
Data sheet
Brand Nanovia
Technology Fused Deposition Modeling (FDM)
Type of consumables Filament (non proprietary)
Filament diameter 1.75mm, 2.85mm
Material Carbon
Net weight 500g
Color Black
Extrusion temperature 250 to 270°C
Build plate temperature 90 to 110°C (heated build plate required)
Printing speed 30 to 60 mm/s
Tensile strength 2700 MPa
Elongation at break 10%
Density 1.08 g/cm³
Reviews(0)
No review submitted for the moment
You may also like
  • This PTFE dry lubricant from WD-40 is ideal for lubricating mechanical parts, including the axles, of your 3D printer. 400ml size.

    0 review
    14,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • A stainless steel spatula with handle in two materials, useful for many applications with your 3D printer. The stainless steel finish ensures a long life for your equipment! 50mm wide spatula.

    0 review
    3,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • These thin needles allow you to clean and unclog the nozzle of your 3D printer in case of a blockage causing filament extrusion problems.

    0 review
    4,20 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • The caliper with LCD digital display measures the accuracy of your 3D prints. Made of carbon, it can measure from 0 to 15 cm with an accuracy of 0.1mm (100 microns).

    0 review
    16,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
Newsletter subscription
Let's keep in touch !