Ultimaker 2+

0 review
Ref. 9620

The Ultimaker 2+ is the fastest and most accurate 3D printer on the market. There's no need for any special technical knowledge to start printing in 3D, using what is undoubtedly the best 3D printer on the market in terms of performance.

2 299,00 € Tax incl. 1 915,83 € Tax excl.

Including 0,46 € for ecotax

In stock Shipped within 24 hours

Companies inside EU
No taxes to pay
Free shipping for
100€ or more
Expert support
Buy at Makershop
Description

Ultimaker 2+: the fastest and most accurate printer on the market
 

With a stylish design, the Ultimaker 2+ has a built-in SD card reader for independent operation (no more need to connect to a PC) and an LCD screen for easy reading and configuring your settings when printing

Performance-wise, this 3D printer lets you print objects in the finest detail thanks to a layer thickness as fine as 0.02 millimetres (20 microns), the highest resolution available on the market, with unmatched surface finish on your 3D prints. As for speed, the Ultimaker 2+ breaks the record once again with a maximum speed of 300mm/s.

Unmatched features

Every centimetre of the Ultimaker 2+ is designed to create the easiest and most reliable 3D printing experience possible. With extreme 20-micron precision and silent operation, it’s a leap forward in high-resolution 3D printing.
 
  • Warranty: 12 months after purchase
  • Lifetime technical support: From Makershop
  • Experts in 3D printing: the Ultimaker has a community of over 10,000 active members
  • Quality: Layer thickness as little as 20 microns (0.02 mm)
  • Fast: Speed of 30mm to 300mm/s
  • Software: Cura is the most frequently used slicer on the market, free and developed by Ultimaker
  • Open Source: A global R&D team offering the best innovations

Transfer the STL file to your Ultimaker 2+ and print!
Ultimaker 2 rewards

Reliable and self-contained

The Ultimaker 2+ is ready to print straight out of the packaging. The Cura software is intuitive, quickly and intelligently preparing the 3D model for printing. A scroll wheel on the front of the Ultimaker 2+ lets you adjust the speed and heat, even during printing. Even the longest 3D print jobs are successfully printed using the built-in SD reader, and the embedded technology ensures accurate results, from the smallest to the largest prototypes.
 

Quality rewarded

The ingenious print head prints your creation, layer by layer, with an accuracy of 20 microns thick. This means that the print lines are barely noticeable and create a super-smooth finish. With its heated printing plate and two efficient fans, the Ultimaker 2+ also prints the most complex overhangs, bridges and cantilevers.

Awards:
 
  • Make Magazine: Best embedded technology
  • 3D Printshow: Best desktop 3D printer
  • 3D Hubs: Most sought-after 3D printer
  • PC MAG: Editor's choice

 

The Ultimaker 2+ is versatile, printing all types of filaments

Open Source, the Ultimaker 2+ prints all types of 2.85mm and 3mm filaments. The nozzle can heat up to 260°C, allowing it to print PLA, ABS, Nylon, PET, Flexible, Composite metal and lots of other materials simply by following the appropriate settings for each filament.
 

An active community of 10,000 experts

The Ultimaker community is the most active in the world, made up of experts who are always ready to offer 3D printing advice and useful tips, with a large platform of resources for all levels. Some updates, ideas and key products have been designed out of this brand community, and in particular through the discussion forum.
 

Cura: software for all

Cura has been designed to get the most out of the Ultimaker 2+. And vice versa. Born out of the Open Source collaboration, software and machine create a unique 3D printing experience that’s stable and reliable. This innovative software brings 3D printing within everyone’s reach. For beginners, it does everything for you, and for experts, there’s a world of advanced settings so you can continue to take your printing further.
 


Ultimaker 2+ video

Data sheet
Brand Ultimaker
Weight 11.3 Kg
Technology Fused Deposition Modeling (FDM)
Build volume (L x W x H) 223 x 223 x 205 mm
Product dimensions 357 x 342 x 388 mm
Precision (layer height) 600 to 20 microns
X/Y/Z Axis precision 12.5 / 12.5 / 5 microns
Max. speed 300mm/s
Type of consumables Filament (non proprietary)
Compatible material All types of filaments
Filament diameter 2.85mm
Nozzle diameter 4 buses : 0.25mm, 0.4mm, 0.6mm, 0.8mm
Number of nozzle 1
Heated build plate Yes
Connexion SD Card / USB connector
Software Ultimaker Cura
Type of files STL / OBJ / X3D / 3MF
Noise level 50 dB
OS Compatibility Windows / Mac OS / Linux
Warranty 2 ans (hors système d'extrusion)
Pays de provenance Netherlands
Reviews(0)
No review submitted for the moment
You may also like
  • This glass plate is only compatible with the Ultimaker 2. It helps support printed objects and diffuses heat from the heating plate. Sold as a spare part.

    0 review
    34,90 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Heater cartridge for the Ultimaker 2. This 24V 25W heater cartridge can raise the temperature in the print head of the Ultimaker 2. Only compatible with the Ultimaker 2.

    0 review
    42,00 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Stainless steel nozzle, 0.50mm in diameter, for Ultimaker 2(+). When changing the nozzle, it is recommended that you do it hot. Nozzle sold individually.

    0 review
    14,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • The cover for the Ultimaker 2 and 2+ consists of an upper enclosure, a filter and a door. This cover allows you to have a completely enclosed and secure printer.

    0 review
    369,00 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Maintenance kit for Ultimaker 2+ and Extended 2+. The kit contains all the items necessary to maintain your machine in a single solution. The kit includes spare parts and various types of mechanical grease.   Only compatible with Ultimaker 2+ and 2 Extended+.

    0 review
    226,80 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
Products in the same category
  • The cover for the Ultimaker 2 and 2+ consists of an upper enclosure, a filter and a door. This cover allows you to have a completely enclosed and secure printer.

    0 review
    369,00 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Very versatile for industrial applications, TPU 95A (thermoplastic polyurethane) is the filament for a wide range of manufacturing projects that require semi-flexible characteristics. 750g spool.

    0 review
    71,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • CPE filament from the Ultimaker brand produces strong prints that are resistant to chemicals and optimised for Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    65,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • With Ultimaker PC (polycarbonate) filament, you can print heavy and difficult parts that retain dimensional stability even when the material is exposed to temperatures as high as 110°C. PC is the perfect filament for printing moulds, tools and functional prototypes.

    0 review
    65,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • Used by numerous manufacturers worldwide, Nylon (polyamide) is well known for its impressive durability, with high strength, flexibility, low friction, and corrosion resistance. With its ability to withstand severe mechanical stress, Ultimaker Nylon is an excellent choice for functional prototypes and end-use parts. 750g spool.

    0 review
    65,40 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • CPE filament from the Ultimaker brand produces strong prints that are resistant to chemicals and optimised for Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    49,80 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • CPE filament from the Ultimaker brand produces strong prints that are resistant to chemicals and optimised for Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    49,80 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • 0 review
    47,40 € Tax incl.
    In Stock |
    0 review In Stock
  • PLA filament from the Ultimaker brand that allows easy, quick printing on all Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    39,60 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • PLA filament from the Ultimaker brand that allows easy, quick printing on all Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    39,60 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • ABS filament from the Ultimaker brand to produce strong prints that last. Perfect for functional prototyping and optimised for Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    39,60 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
  • ABS filament from the Ultimaker brand to produce strong prints that last. Perfect for functional prototyping and optimised for Ultimaker printers. 750g spool, vacuum packed for better storage.

    0 review
    39,60 € Tax incl.
    In Stock | Shipped within 24 hours
    0 review In Stock
Newsletter subscription
Let's keep in touch !